I bit the bullet and started looking for a receiver that had enough HDMI inputs, enough SVHS inputs, an input for my iPod and RCA-phono/USB-phono, LAN and computer. Previously, I had a Pioneer VSX-9500, then a Yamaha model with about 5 SVHS inputs, and a Denon AVR 4802R with 7 SVHS inputs. After a couple of months of searching through the usual suspects, including the other brands I have had, I settled on the Yamaha RX-V3800 in black because it allowed me to do enough of what I wanted to do from my shopping list I mentiond earlier.
First of all, I was surprised to find that all the receivers I looked at had downsized their number of connections from four years ago when I bought my Denon receiver. I was having to look at receivers costing 2 to 3 times as much as the yamaha RX-V3800 before I could find one with as many inputs, and I found even Yamaha’s RX-Z11 had the same number as the RX-V3800, and it ran almost $5,000.00. Then, I thought about it… what were the inputs I really used most of all: SVHS, BluRay, HD-DVD, DVR, DVR-VHS combo, CD player, cassette, and phono. There was one input remaining that I was able to use with a junction box for ED-Beta,Laser Disc, XM radio, and an DVR-R recorder, so the Yamaha RX-V3800 would do without me having to compromise too much.
But, let’s get to the machine and all of it’s pluses:
The sound… It is terrific! With my previous system, I had to gerry-rig the side speakers using a quadraphonic synthesizer, but the yamaha RX-V3800 has the following speaker connections: left-front, right-front, center, left-side, right-side, left-rear, right-rear and sub-woofer. My previous set-up had a rear-center, and after reading a little, I found you could hook-up a rear center by using the RCA connection labeled “Single (SB).” (There’s a “SURBACK PRESENCE” that can be used, also, but it was designed for when you only wanted one rear channel). When you set-up the speakers, Yamaha has a special optimizer microphone you plug into the front of the unit and it balances your speakers based on where you have the microphone placed.
The four HDMI inputs are great, too, because it allows me to have the best picture and sound from my BluRay, HD-DVD, Satellite Receiver, and DVR-VHS unit.
The Internet radio is easy to use, and it is programmed with plenty of stations. The selection of stations with the Yamaha remote is easy and the sound is wonderful.
The iPod Yamaha YDS-10 dock option is a must if you have an iPod. Quite frankly, I probably won’t use my phono, now, except to make digital recordings of out-of-date vinyl recordings because of the ease of operation of the iPod through the docking station, especially if you have the 80 or 160 GB model of iPod with all the music they can hold.
The XM set-up with the XM Extreme is nice and integrates smoothly. I, actually, use an older XM radio through two RCA inputs, but with the XM Extreme directly connected, it is easier to use.
The computer set-up is not as easy as the manual would make you believe, but it is easier if you do the following: Make sure your PC has XP Service Pack Two or Vista on it AND you have Windows Media Player 11 installed, have your 232 Serial Ports between the computer and the Yamaha RX-V-3800 connected, and have a networking guide for your operating system. Once you have those done, you go into Windows Media Player, select “Library” at the top, and then select “Media Sharing” to allow the tunes on your PC to be shared with your receiver. For other PC’s on your LAN, it would be best for you to already have those tunes shared, but if you connect an iPod, that might not be necessary. While I am at it, I will say this about Media Player ll: once you’ve checked the right boxes, it does a good job.
Overall, I am extremely pleased with the Yamaha RX-V3800. I did think that they could have done a better job with the manual… for example, in setting-up the PC, you start reading the instructions and it refers you to two other sections of the manual, and when things just didn’t seem to jell, one finds that later in the manual, they show you how to do the set-up more thoroughly and manually, if needed. That said and done, though, I would buy this receiver again. I do wish it had more inputs, but then again, most people don’t have as much to hook-up as I do. If there were a four-and-a-half stars rating, I would give it, but I’m stuck giving it only four.
By: Michell W.
Archive for January, 2010
Yamaha RX-V3800BL 7.1-Channel Network Home Theater Receiver Reviews
January 26th, 2010Advancements in Networking Hardware and Computer Peripherals
January 26th, 2010In this era of computers, there is hardly any household without a personal computer at home. Computers are now believed to be the solution to all daily works that one needs to search for. Life has been much better than before with all your needs being fulfilled at yours arms distance. The electronic market is booming with hundreds of latest technology computer peripherals being launched and sold in short spans of time.
With quick advancements in technology, the size and the price of the devices has gradually come down, while the efficiency and capacity has considerably increased. The scenario is same in all cases, whether it is about internal components like processor, RAM, motherboard, graphics card, and hard disk or for peripheral accessories like mouse, speakers, Bluetooth dongles, keyboards (wired/wireless), monitors etc.
Since many years, the main advancement has been seen in trends of the data storage. Latest technology hard drives and RAM’s have now given us the freedom to store and transfer unlimited amounts of on our systems. Also with newer versions of flash memory cards, USB extension cables, portable drives and other mobile computer accessories, carrying data along with you has become much easier. USB is a serial interface technology that has replaced existing serial and parallel ports drastically making connections clean and manageable.
Communication with your loved ones has been facilitated through the internet at much cheaper costs. With significant increase in varieties of handheld computer accessories like webcams, Ethernet cables, earphones and wireless broadband LAN computer networking hardware, keeping you connected to the whole world is no longer an expensive procedure. Also with the coming of wifi mesh networking hardware support and cat5e, cat6, Cat6a cables there has been a tremendous enhancement in the wireless technologies. The cat5e, cat6, Cat6a cable standard provides performance of up to 250 MHz and is suitable for 10BASE-T / 100BASE-TX and 1000BASE-T (Gigabit Ethernet).
Our mode of entertainment has also seen gradual technological changes in multimedia stuff. The quality of voice and visual devices has effectively been refined over years. With the coming of powerful digital media players and audio visual cables it is possible to listen to music with refined bass and vocals and visualize smooth functioning of graphics.
Despite the incredible improvement in performance and functionalities of computer hardware and networking peripherals, the price of these components has actually fallen steadily. There are vast arrays of computer peripherals that allow us to do amazing things. But in my opinion we should go for the type of peripherals that suit our daily life in every way.
By: Maximum Hit
Tips on How to Network Two Computers to Same Printer
January 22nd, 2010Many times, you may need to connect more than one computer to a single printer. This can happen either in the case of home based businesses with various groups or even in regular offices with many users involved.
Tips to connect 2 computers to one printer
While going about connecting 2 computers to one printer, you need to follow a few steps to ensure the process is smooth and hassle-free. Here we outline some of these basic steps.
Connection: To be able to connect both computers to a single printer you need to setup printer on ‘client’ PC:
Connect printer to ‘client’ PC and install it. This way all required software and drivers are installed.
Reconnect to ‘host’ PC
Select ‘Properties’ by right clicking
Select ‘shared’
In ‘client’ PC:
Select ‘My Network Places’ or ‘Network Neighborhood’
Printer appears as ‘shared’
Double click on the printer to install it
The same printer is now installed twice – as local and network printer
If always using network printer, set it as ‘default’
Set up a LAN: To be able to perform a 2 pc 1 printer connection, you first need to set up a LAN or a Local Area Network. To do this, follow these instructions:
You could either use a network adapter in your home office OR
To view the status of the network connection, you need to
Double click on Network Connections
Right click on the particular LAN
Select Status option
You could also right click on the LAN, click on Properties and then select the ‘Show icon in taskbar notification area when connected’ checkbox. This will enable you to automatically view the status in the taskbar area
Get a printer switch: Printer switches enable you to connect 2 computers to one printer. They come in a variety of types such as auto printer switch and parallel printer switch. There are several vendors available online who provide these switches at good discounts.
Crossover cable: You can easily get a crossover cable from your local computer store to connect your computers to your printer. After that you can network and open the desired printer and enable it to be shared between both computers.
Print server: A print server enables you to print simultaneously from two computers at the same time. However you need to ensure you have a router (which will act as a DHCP server). You also need to make sure that it’s not a multifunctional printer you’re working with since most print servers are not able to work with such kinds of printers. In case you do not have a router, you could purchase a PSUS4 print server, then assign static IP on the network cards and print server.
No network ports present: In case there are no network ports present, then you can use either USB or parallel port adapters for your purpose.
By: James Kara Murat